Breakdown & Emergency

     

    The factory-supplied warning triangle is attached to the inside of the boot lid.

     

    The correct inflation pressures for tires fitted at the factory and for the spare wheel, are specified on a sticker and the sticker is on the B pillar Driver side.

     

    The tool kit, jack, tire repair kit (depending on equipment) are stored under floor panel in the front storage area.

     

    During any situation of fault or system malfunction, the charging connector should be released manually. The manual release cables are available under the hood just above the charging flap. Please refer to the Owner’s Manual for detailed procedures.

    Back to top

    © 2024 © AUDI AG.

    “The specified values of fuel consumption and emission are determined according to the mandatory emission test measurement specified in Rule 115 of Central Motor Vehicle Rules 1989 (CMVR), under controlled conditions using reference fuel, at an agency authorized under Rule 126 of CMVR. Fuel consumption and emission values may vary due to factors such as driving habits, road and traffic condition, fuel quality, maintenance practices, loading pattern, ambient condition and engineering tolerances etc.

    The values declared for the vehicles have been obtained from one of the variant tested as per Central Motor Vehicle Rule 115. Fuel consumption and emission value for other variants may differ. Audi India or its authorize dealers shall not be held liable for any difference in fuel consumption values, due to any of the aforesaid variables.

    Due to constant product improvement / changes in regulatory framework, technical specification provided herewith are subject to change without prior notice, customers are requested to contact Audi Call Centre / Audi Authorised Dealer for further details.”